diff --git a/code.py b/code.py
index 97644ef..9b60e45 100755
--- a/code.py
+++ b/code.py
@@ -29,9 +29,6 @@ from adafruit_midi.note_off import NoteOff
 from adafruit_midi.pitch_bend import PitchBend
 from adafruit_midi.control_change import ControlChange
 
-# Midi output settings
-midi_channel = 1  # Target midi channel
-
 # Expression pedal settings
 logarithmic = True  # Expression pedal logarithmic or linear. Set to False for linear
 log_base = 100  # This value changes the feel of the log curve
@@ -42,19 +39,17 @@ exp_pedal_calibration_percent = 80  # 0 - 100
 # Define expression pedals
 expression_pedals = [
     # Set expression pedal midi control change number, and min/max values
-    {"pin": board.GP26, "cc": 1, "cc_min": 0, "cc_max": 127}, # Pedal 1. Pin 31
-    {"pin": board.GP27, "cc": 2, "cc_min": 0, "cc_max": 127}, # Pedal 2. Pin 32
-    {"pin": board.GP28, "cc": 3, "cc_min": 0, "cc_max": 127}  # Peadl 3. Pin 34
+    {"pin": board.GP26, "midi_channel": 1, "cc": 1, "cc_min": 0, "cc_max": 127}, # Pedal 1. Pin 31
+    {"pin": board.GP27, "midi_channel": 1, "cc": 2, "cc_min": 0, "cc_max": 127}, # Pedal 2. Pin 32
+    {"pin": board.GP28, "midi_channel": 1, "cc": 3, "cc_min": 0, "cc_max": 127}  # Peadl 3. Pin 34
 ]
 
 # Devices
 led = digitalio.DigitalInOut(board.LED)
 led.direction = digitalio.Direction.OUTPUT
 uart = busio.UART(tx=board.GP4, rx=board.GP5, baudrate=31250, timeout=0.001)  # UART Midi device on pin 6
-uart_midi = adafruit_midi.MIDI(midi_out=uart, out_channel=midi_channel - 1)
-usb_midi = adafruit_midi.MIDI(
-    midi_out=usb_midi.ports[1], out_channel=midi_channel - 1)
-
+uart_midi = [adafruit_midi.MIDI(midi_out=uart, out_channel=pedal["midi_channel"] - 1) for pedal in expression_pedals]
+usb_midi = [adafruit_midi.MIDI(midi_out=usb_midi.ports[1], out_channel=pedal["midi_channel"] - 1) for pedal in expression_pedals]
 # Initialize expression pedals
 exp_values = [analogio.AnalogIn(pedal["pin"]) for pedal in expression_pedals]
 exp_previous = [exp.value for exp in exp_values]
@@ -89,8 +84,8 @@ while True:
             if exp_max[i] - exp_min[i] > exp_calibration_threshold[i]:
                 led.value = True  # Turn led on
                 cc_val = translate(exp_current, exp_min[i], exp_max[i], expression_pedals[i]["cc_min"], expression_pedals[i]["cc_max"])
-                uart_midi.send(ControlChange(expression_pedals[i]["cc"], cc_val))
-                usb_midi.send(ControlChange(expression_pedals[i]["cc"], cc_val))
+                uart_midi[i].send(ControlChange(expression_pedals[i]["cc"], cc_val))
+                usb_midi[i].send(ControlChange(expression_pedals[i]["cc"], cc_val))
                 led.value = False  # Turn led off
                 print("Pedal {}: Writing Midi Channel: {}, ControlChange: {}, Value {}. Exp Pedal: cur: {}, min: {}, max: {}".format(
-                    i + 1, midi_channel, expression_pedals[i]["cc"], cc_val, exp_current, exp_min[i], exp_max[i]))
+                    i + 1, expression.pedals[i]["midi_channel"], expression_pedals[i]["cc"], cc_val, exp_current, exp_min[i], exp_max[i]))