Initial commit: Phase 1 skeleton

components/controller/app_task.cpp

@@ -0,0 +1,110 @@
+// components/controller/app_task.cpp
+#include "controller/app_task.h"
+#include "midi/midi_transport.h"
+#include "esp_log.h"
+
+static const char* TAG = "app_task";
+
+// Simple pad mapping table (Phase 1 - modifiable)
+struct PadMapping {
+    uint8_t physical_switch;  // 0-9
+    uint8_t midi_channel;     // 1-3
+    uint8_t midi_note;        // Note number (configurable)
+    uint8_t led_index;        // LED index (0-9)
+};
+
+static PadMapping pad_mapping[] = {
+    {0, 1, 0, 0},   // Switch 0 -> Channel 1, Note 0, LED 0
+    {1, 1, 1, 1},   // Switch 1 -> Channel 1, Note 1, LED 1
+    {2, 1, 2, 2},   // Switch 2 -> Channel 1, Note 2, LED 2
+    {3, 1, 3, 3},   // Switch 3 -> Channel 1, Note 3, LED 3
+    {4, 1, 4, 4},   // Switch 4 -> Channel 1, Note 4, LED 4
+    {5, 1, 5, 5},   // Switch 5 -> Channel 1, Note 5, LED 5
+    {6, 1, 6, 6},   // Switch 6 -> Channel 1, Note 6, LED 6
+    {7, 1, 7, 7},   // Switch 7 -> Channel 1, Note 7, LED 7
+    {8, 1, 8, 8},   // Switch 8 -> Channel 1, Note 8, LED 8
+    {9, 1, 9, 9},   // Switch 9 -> Channel 1, Note 9, LED 9
+};
+
+static const uint8_t NUM_PADS = sizeof(pad_mapping) / sizeof(pad_mapping[0]);
+
+BaseType_t app_task(void* parameters) {
+    AppTaskParams* params = (AppTaskParams*)parameters;
+    
+    ESP_LOGI(TAG, "Controller task started");
+    
+    while (true) {
+        // Check for MIDI events
+        MidiEvent midi_event;
+        if (xQueueReceive(params->midi_queue, &midi_event, 0) == pdPASS) {
+            app_process_midi_event(midi_event, params->led_driver);
+        }
+        
+        // Check for switch events (Phase 1 stub)
+        for (uint8_t i = 0; i < NUM_PADS; i++) {
+            bool is_pressed = params->switch_driver->is_pressed(i);
+            static bool last_state[10] = {false};
+            
+            if (is_pressed && !last_state[i]) {
+                // Switch press detected
+                app_process_switch_event(i, true);
+                last_state[i] = true;
+            } else if (!is_pressed && last_state[i]) {
+                // Switch release detected
+                app_process_switch_event(i, false);
+                last_state[i] = false;
+            }
+        }
+        
+        vTaskDelay(pdMS_TO_TICKS(10));  // 10ms task period
+    }
+}
+
+void app_process_midi_event(const MidiEvent& event, LedStub* led_driver) {
+    // Convert MIDI event to LED command
+    // This is where we map MIDI to LED state
+    uint8_t led_index = -1;
+    uint8_t midi_channel = event.channel;
+    uint8_t midi_note = event.data1;
+    uint8_t midi_velocity = event.data2;
+    
+    // Find matching LED index from pad mapping
+    for (uint8_t i = 0; i < NUM_PADS; i++) {
+        if (pad_mapping[i].midi_channel == midi_channel && 
+            pad_mapping[i].midi_note == midi_note) {
+            led_index = pad_mapping[i].led_index;
+            break;
+        }
+    }
+    
+    if (led_index != 255) {
+        // Trigger LED state change
+        led_driver->set_led_state(
+            pad_mapping[led_index].midi_note,
+            pad_mapping[led_index].midi_channel,
+            event.type == MidiEvent::NOTE_ON ? midi_velocity : 0
+        );
+        
+        ESP_LOGI(TAG, "MIDI PROCESSED: Channel %d Note %d Velocity %d -> LED %d",
+                 midi_channel, midi_note, midi_velocity, led_index);
+    }
+}
+
+void app_process_switch_event(uint8_t switch_id, bool pressed) {
+    // Convert switch event to MIDI event
+    MidiEvent midi_event;
+    
+    // Find mapping for this switch
+    for (uint8_t i = 0; i < NUM_PADS; i++) {
+        if (pad_mapping[i].physical_switch == switch_id) {
+            midi_event.channel = pad_mapping[i].midi_channel;
+            midi_event.data1 = pad_mapping[i].midi_note;
+            midi_event.data2 = pressed ? 127 : 0;  // Full velocity for press
+            midi_event.type = pressed ? MidiEvent::NOTE_ON : MidiEvent::NOTE_OFF;
+            
+            ESP_LOGI(TAG, "SWITCH EVENT: Switch %d -> Channel %d Note %d Velocity %d",
+                     switch_id, midi_event.channel, midi_event.data1, midi_event.data2);
+            break;
+        }
+    }
+}

components/controller/app_task.h

@@ -0,0 +1,22 @@
+// components/controller/app_task.h
+#pragma once
+
+#include <freertos/FreeRTOS.h>
+#include <freertos/queue.h>
+#include "hal/led_stub.h"
+#include "hal/switch_stub.h"
+
+// Application task parameters
+struct AppTaskParams {
+    LedStub* led_driver;
+    SwitchStub* switch_driver;
+    QueueHandle_t midi_queue;
+};
+
+// Application task function
+BaseType_t app_task(void* parameters);
+
+// Application state management
+void app_process_midi_event(const MidiEvent& event);
+void app_process_switch_event(uint8_t switch_id, bool pressed);
+void app_initialize_config();

components/hal/led_stub.cpp

@@ -0,0 +1,62 @@
+// hal/led_stub.cpp
+#include "hal/led_stub.h"
+#include "esp_log.h"
+
+static const char* TAG = "led_stub";
+
+class DefaultLedStub : public LedStub {
+private:
+    LedState led_states[10];  // Support up to 10 LEDs
+    bool initialized;
+    
+public:
+    DefaultLedStub() : initialized(false) {
+        // Initialize all LEDs to off state
+        for (int i = 0; i < 10; i++) {
+            led_states[i].active = false;
+            led_states[i].velocity = 0;
+        }
+    }
+    
+    void begin() override {
+        // GPIO initialization would go here
+        // For Phase 1, this is a stub
+        initialized = true;
+        ESP_LOGI(TAG, "LED stub initialized (GPIO pins not configured yet)");
+    }
+    
+    void set_led_state(uint8_t note, uint8_t channel, uint8_t velocity) override {
+        if (!initialized) return;
+        
+        // For Phase 1, we assume note 0-9 maps directly to LED 0-9
+        // This is configurable in the PadMapping
+        uint8_t led_index = note_to_index(note);
+        
+        if (led_index < 10) {
+            led_states[led_index].note = note;
+            led_states[led_index].channel = channel;
+            led_states[led_index].velocity = velocity;
+            led_states[led_index].active = (velocity > 0);
+            led_states[led_index].timestamp = 0;  // TODO: Add proper timestamp
+            
+            ESP_LOGI(TAG, "LED STATE: Note %d -> LED %d Channel %d Velocity %d (%s)",
+                     note, led_index, channel, velocity,
+                     velocity > 0 ? "ON" : "OFF");
+        } else {
+            ESP_LOGW(TAG, "LED index out of range: %d (Note: %d)", led_index, note);
+        }
+    }
+    
+    void clear_all() override {
+        for (int i = 0; i < 10; i++) {
+            led_states[i].active = false;
+            led_states[i].velocity = 0;
+        }
+        ESP_LOGI(TAG, "All LEDs cleared");
+    }
+};
+
+// Factory function to create the default LED stub
+LedStub* create_led_stub() {
+    return new DefaultLedStub();
+}

components/hal/led_stub.h

@@ -0,0 +1,27 @@
+// hal/led_stub.h
+#pragma once
+
+class LedStub {
+public:
+    virtual ~LedStub() {}
+    
+    virtual void begin() = 0;
+    virtual void set_led_state(uint8_t note, uint8_t channel, uint8_t velocity) = 0;
+    virtual void clear_all() = 0;
+    
+    // Helper function to map MIDI note to LED index
+    virtual uint8_t note_to_index(uint8_t note) {
+        // Default implementation - direct mapping
+        // Can be overridden by specific implementations
+        return note;
+    }
+};
+
+// LED state structure
+struct LedState {
+    uint8_t note;           // Launchpad note
+    uint8_t channel;        // LED channel (1-3)
+    uint8_t velocity;       // Color/brightness (0-127)
+    uint32_t timestamp;     // When state was set
+    bool active;           // Current on/off state
+};

components/hal/switch_stub.h

@@ -0,0 +1,24 @@
+// hal/switch_stub.h
+#pragma once
+
+class SwitchStub {
+public:
+    virtual ~SwitchStub() {}
+    
+    virtual void begin() = 0;
+    virtual bool is_pressed(uint8_t switch_id) = 0;
+    
+    // Configuration methods
+    virtual void configure_switch(uint8_t switch_id, uint8_t gpio_pin) = 0;
+    virtual void set_debounce_time(uint32_t time_ms) = 0;
+};
+
+// Switch state structure
+struct SwitchState {
+    uint8_t id;              // Switch identifier
+    uint8_t gpio_pin;        // GPIO pin (if applicable)
+    bool current_state;      // Current pressed state
+    bool previous_state;     // Previous state (for debounce)
+    uint32_t last_change_time; // Timestamp of last state change
+    uint32_t debounce_time;  // Debounce time in ms
+};

components/midi/midi_transport.cpp

@@ -0,0 +1,121 @@
+// midi/midi_transport.cpp
+#include "midi/midi_transport.h"
+#include "esp_log.h"
+#include "tusb.h"
+#include "class/midi/midi.h"
+
+static const char* TAG = "midi_transport";
+
+UsbMidiTransport::UsbMidiTransport() : event_queue(nullptr), initialized(false) {
+}
+
+UsbMidiTransport::~UsbMidiTransport() {
+    if (event_queue != NULL) {
+        vQueueDelete(event_queue);
+    }
+}
+
+bool UsbMidiTransport::begin() {
+    // Create event queue
+    event_queue = xQueueCreate(32, sizeof(MidiEvent));
+    if (event_queue == NULL) {
+        ESP_LOGE(TAG, "Failed to create event queue");
+        return false;
+    }
+    
+    // Initialize TinyUSB MIDI
+    tusb_init();
+    
+    // Configure USB device descriptors
+    tusb_device_set_string(1, "Loopy Foot Controller");
+    
+    // Register MIDI callback
+    tuh_midi_set_cb(usb_midi_callback);
+    
+    initialized = true;
+    ESP_LOGI(TAG, "USB MIDI transport initialized");
+    return true;
+}
+
+void UsbMidiTransport::task() {
+    if (!initialized) return;
+    
+    // Process USB MIDI events
+    while (tuh_uart_read_available()) {
+        uint8_t buffer[128];
+        uint32_t bytes_read = tuh_midi_read_packet(buffer, sizeof(buffer));
+        
+        if (bytes_read > 0) {
+            MidiEvent event;
+            parse_midi_packet(buffer, bytes_read, event);
+            
+            // Log incoming event
+            log_incoming("USB", event);
+            
+            // Send to event queue
+            if (xQueueSend(event_queue, &event, portMAX_DELAY) != pdPASS) {
+                ESP_LOGW(TAG, "Failed to queue MIDI event");
+            }
+        }
+    }
+}
+
+void usb_midi_callback(const uint8_t* event, uint32_t size) {
+    // This callback is called by TinyUSB when MIDI data is received
+    // For now, we'll implement a simple version
+    // In a full implementation, this would parse the MIDI packet
+    
+    MidiEvent midi_event;
+    // TODO: Implement actual MIDI parsing based on event type
+    // For Phase 1, we'll handle basic Note On/Off messages
+}
+
+void UsbMidiTransport::log_incoming(const char* source, const MidiEvent& event) {
+    const char* type_str;
+    switch (event.type) {
+        case MidiEvent::NOTE_ON: type_str = "NOTE_ON"; break;
+        case MidiEvent::NOTE_OFF: type_str = "NOTE_OFF"; break;
+        case MidiEvent::CONTROL_CHANGE: type_str = "CONTROL_CHANGE"; break;
+        default: type_str = "UNKNOWN"; break;
+    }
+    
+    ESP_LOGI(TAG, "MIDI IN: %s Channel: %d Type: %s Note: %d Velocity: %d",
+             source, event.channel, type_str, event.data1, event.data2);
+}
+
+void UsbMidiTransport::parse_midi_packet(const uint8_t* buffer, uint32_t size, MidiEvent& event) {
+    // Simple MIDI parser for basic messages
+    // This is a simplified version for Phase 1
+    
+    if (size < 2) return;
+    
+    uint8_t status = buffer[0];
+    uint8_t type = status & 0xF0;  // Message type
+    uint8_t channel = status & 0x0F;  // Channel (0-15, but MIDI uses 1-16)
+    
+    event.channel = channel + 1;  // Convert to 1-16 range
+    
+    switch (type) {
+        case 0x90:  // Note On
+            event.type = MidiEvent::NOTE_ON;
+            event.data1 = buffer[1];
+            event.data2 = buffer[2];
+            break;
+        
+        case 0x80:  // Note Off
+            event.type = MidiEvent::NOTE_OFF;
+            event.data1 = buffer[1];
+            event.data2 = buffer[2];
+            break;
+        
+        case 0xB0:  // Control Change
+            event.type = MidiEvent::CONTROL_CHANGE;
+            event.data1 = buffer[1];
+            event.data2 = buffer[2];
+            break;
+            
+        default:
+            // Unknown message type - ignore for now
+            return;
+    }
+}

components/midi/midi_transport.h

@@ -0,0 +1,46 @@
+// midi/midi_transport.h
+#pragma once
+
+#include <cstdint>
+#include <freertos/FreeRTOS.h>
+#include <freertos/queue.h>
+
+struct MidiEvent {
+    enum Type {
+        NOTE_ON,
+        NOTE_OFF,
+        CONTROL_CHANGE,
+        PROGRAM_CHANGE,
+        PITCH_BEND,
+        AFTERTOUCH_POLY,
+        AFTERTOUCH_CHAN,
+        SYSEX
+    } type;
+    
+    uint8_t channel;      // MIDI channel (1-16)
+    uint8_t data1;         // Note number or CC number
+    uint8_t data2;         // Velocity or CC value
+    uint32_t timestamp;   // Event timestamp
+};
+
+class UsbMidiTransport {
+public:
+    UsbMidiTransport();
+    ~UsbMidiTransport();
+    
+    bool begin();
+    void task();
+    
+    // Event queue for communication with controller task
+    QueueHandle_t get_event_queue() const { return event_queue; }
+    
+    // Diagnostic logging
+    void log_incoming(const char* source, const MidiEvent& event);
+    
+private:
+    QueueHandle_t event_queue;
+    bool initialized;
+};
+
+// Forward declaration for USB callback
+void usb_midi_callback(const uint8_t* event, uint32_t size);