FastLED has better ESP32 support and handles timing/RMT properly.
- Use CRGB array instead of Adafruit_NeoPixel
- FastLED.show() is more reliable on ESP32-S3
- probe command now tests all LEDs at max brightness
- probe: toggles LD/CLK, reads DI state at each step, tests single pixel
- pixel0/pixel1: single pixel at max brightness for testing
- Increased LD pulse timing to 20us
- Increased CLK timing to 2us
- NeoPixel brightness raised to 80
PixelStomp MUX uses:
- WS2812C LEDs: one data line via DAT (GPIO 9), NeoPixel protocol
- 74HC165 shift register: LD/CLK/DI for reading 8 button states
Changes:
- Use Adafruit NeoPixel library for LED control
- Proper 74HC165 parallel-load shift-in for buttons
- 8 switches + 8 LEDs (was incorrectly 10)
- Diagnostic commands: dump, ledtest, red, green, blue, read
- New PixelStompMux class with shift register read/write
- Read 10 buttons via DI (active LOW)
- Drive 10 LEDs via DAT (shift out + latch)
- LED startup animation uses MUX
- Switch polling reads from MUX shift register
- MUX instance shared between switch and LED drivers
- Replace ESP-IDF structure with PlatformIO (platformio.ini)
- Move source files to src/ and include/
- Move libraries to lib/ directory
- Replace FreeRTOS with Arduino task/vTaskDelay
- Use Arduino MIDI library instead of raw TinyUSB
- Dual-core: MIDI on core 0, controller on core 1
ash