ash
6aa3579317
Add palette test mode (hold pad 0+9 for 2s), comprehensive MIDI handling
2026-06-24 06:29:08 +00:00
ash
840bcf9a1e
Fix MidiEvent::SYSTEM -> SYSEX
2026-06-24 06:23:42 +00:00
ash
37c6e66584
Add visual MIDI activity indicator (flashes pad 0 on any MIDI receive)
2026-06-24 06:03:27 +00:00
ash
296611ce52
Send CC2-11 for button presses (match Loopy Pro)
2026-06-24 05:58:10 +00:00
ash
b5a1710ebd
Map CC 2-11 to pads 0-9 for Loopy Pro LED feedback
2026-06-24 05:56:58 +00:00
ash
550fb7616e
Add CC (Control Change) handling for Loopy Pro LED control
2026-06-24 05:52:21 +00:00
ash
0e5cbeb73d
Clean up: remove boot layout test (Launchpad X mapping confirmed working)
2026-06-24 05:47:09 +00:00
ash
e2997a595d
Simplify boot layout test to single quick pass (Launchpad X only)
2026-06-24 05:39:39 +00:00
ash
26c86be7ea
Add boot-time layout test (no serial input needed)
2026-06-24 04:33:02 +00:00
ash
83e9e29520
Add padtest command - tests each pad individually with 3s delay
2026-06-24 04:22:34 +00:00
ash
6ec306bbf7
Replace delay() with vTaskDelay() in miditest to avoid watchdog reset
2026-06-24 04:05:25 +00:00
ash
6c64c91e55
Add miditest and mapping commands for LED layout debugging
2026-06-24 03:56:30 +00:00
ash
e5e546ed39
Update pad_mapping to Launchpad X standard notes 36-45 (C2-A2) on channel 1
2026-06-24 03:37:29 +00:00
ash
7f061aecbf
Fix palette to 128 entries (3 purple at end)
2026-06-24 03:20:40 +00:00
ash
efaec9df71
Fix palette to exactly 128 entries (0-127)
2026-06-24 03:16:50 +00:00
ash
6503799875
Fix palette array size (128) and remove duplicate clear_all()
2026-06-24 01:41:14 +00:00
ash
bd20d1938b
Fix duplicate set_led_state, add set_led_brightness to interface
2026-06-24 01:28:56 +00:00
ash
b2d726a953
Add Launchpad X velocity->color palette and matching startup animation
2026-06-24 01:25:45 +00:00
ash
2eced5c007
Add debug logging for incoming MIDI events
2026-06-24 01:07:00 +00:00
ash
ec0834ed48
Remove isInitialized() check - not in v3.1.0 API
2026-06-24 00:56:44 +00:00
ash
9c95225a37
Back to Adafruit TinyUSB Library v3.1.0 with full init ownership (no USE_TINYUSB=1 conflict)
2026-06-24 00:53:13 +00:00
ash
65d8120abb
Fix USB diagnostic command to use native USB API
2026-06-24 00:47:00 +00:00
ash
10f5117a15
Try USB.h only for USB MIDI
2026-06-24 00:45:53 +00:00
ash
c1a78db7f1
Add ESP32 USB built-in library, remove Adafruit_TinyUSB.h include from main.cpp
2026-06-24 00:38:24 +00:00
ash
9fd0231b48
Switch to ESP32 Arduino core native USB MIDI API (USB.h + USBMIDI.h), remove Adafruit TinyUSB dependency
2026-06-24 00:31:15 +00:00
ash
9ebd568b9c
Add detach/attach re-enumeration after MIDI interface added
2026-06-24 00:20:45 +00:00
ash
39a052d7da
Pin Adafruit TinyUSB to <3.0.0 (older TinyUSB compatible with ESP32 core). Remove dcd_stubs.
2026-06-23 23:51:49 +00:00
ash
f4e7e6a64c
Delete Adafruit's DCD, add stubs for missing DCD functions, use ESP32 core DCD
2026-06-23 23:44:30 +00:00
ash
9379d0c0eb
Fix build: remove TinyUSBDevice.idVendor/idProduct (API doesn't exist)
2026-06-23 23:24:23 +00:00
ash
8bbf572414
Fix crash/reboot: remove conflicting TinyUSB core sources from Adafruit lib instead of allow-multiple-definition
2026-06-23 23:23:40 +00:00
ash
cdfac43bfe
Fix usb command: remove non-existent getter methods, use only mounted() and ready()
2026-06-23 23:13:28 +00:00
ash
c737849a96
Fix build: add Adafruit_TinyUSB.h include in main.cpp, add build_unflags to prevent ARDUINO_USB_MODE redefinition warning
2026-06-23 23:12:42 +00:00
ash
a3e86d0ddf
Fix USB MIDI enumeration: switch from ARDUINO_USB_MODE=1 to 0 (matches working Adafruit TinyUSB example), add explicit TinyUSBDevice.begin(0) and detach/attach re-enumeration, remove conflicting tusb_config.h
2026-06-23 23:10:20 +00:00
ash
d957e276bd
Fix daisy-chain MUX byte order: MUX1 (first 8 bits) → low byte/switches 0-7, MUX2 → high byte/switches 8-15
2026-06-23 22:49:59 +00:00
ash
9a56591453
Fix NUM_LEDS=10, NUM_BUTTONS=16 for 2 daisy-chained MUX boards. Fix pixel7 stuck blue (was only sending 8 LED data to 10-LED chain)
2026-06-23 22:43:53 +00:00
ash
cc6cc2fa32
FIX SWAPPED PINS: GPIO 9 is 74HC165 data, GPIO 12 is WS2812C data. Product docs: DAT/LD/CLK = 74HC165, + WS2812C data.
2026-06-23 22:31:08 +00:00
ash
8d585e9c40
Fix RMT crash: use FASTLED_USES_ESP32S3_I2S to avoid broken RMT. Remove rmtled.
2026-06-23 22:29:25 +00:00
ash
6274ff4182
Add rmtled: direct RMT WS2812 driver via ESP-IDF API
2026-06-23 22:26:04 +00:00
ash
835e30b8b1
Add anim command to run FastLED animation from loop()
2026-06-23 22:24:28 +00:00
ash
943e9c02a4
Add gpio.h and esp_rom_sys.h includes for rawled
2026-06-23 14:48:15 +00:00
ash
715aca3365
Fix rawled: GRB RED={0x00,0xFF,0x00}, differentiate 0/1 bit timing
2026-06-23 14:47:48 +00:00
ash
bec8025f0a
Add rawled bit-bang command, restore FastLED
2026-06-23 14:39:46 +00:00
ash
6c678ce18a
Add raw GPIO test command to diagnose pin connectivity
2026-06-23 14:35:15 +00:00
ash
5f2ad9ef91
Switch from FastLED to Adafruit NeoPixel (more reliable on ESP32-S3 RMT)
2026-06-23 14:32:19 +00:00
ash
2931571880
Fix WS2812 color order to GRB (matching BMC)
2026-06-23 14:26:27 +00:00
ash
30b56a0b4c
Match BMC protocol: 5µs delays, read DI before CLK, WS2812+RGB, power limit
2026-06-23 14:08:43 +00:00
ash
0db36a0129
Better MUX probe: 5 rounds, CLK before/after DI reads, single LED test
2026-06-23 14:01:51 +00:00
ash
5de4de4f1a
Switch from NeoPixel to FastLED for ESP32-S3 LED reliability
...
FastLED has better ESP32 support and handles timing/RMT properly.
- Use CRGB array instead of Adafruit_NeoPixel
- FastLED.show() is more reliable on ESP32-S3
- probe command now tests all LEDs at max brightness
2026-06-23 13:56:05 +00:00
ash
76dec0d359
Fix 74HC165 protocol: match RoxMux library polarity
...
Key difference from RoxMux (the library designed for this hardware):
- LD pin starts HIGH, pulses LOW->HIGH to latch (was inverted)
- Data pin is INPUT (not INPUT_PULLUP) - 10k pullups on MUX board
- bitWrite instead of manual bit shifting
2026-06-23 13:51:21 +00:00
ash
70097057fb
Add hardware probe and single-pixel test commands
...
- probe: toggles LD/CLK, reads DI state at each step, tests single pixel
- pixel0/pixel1: single pixel at max brightness for testing
- Increased LD pulse timing to 20us
- Increased CLK timing to 2us
- NeoPixel brightness raised to 80
2026-06-23 13:45:37 +00:00
ash