- Pad 0-1: Blue, 2-4: Orange, 5: Red, 6: White, 7: Amber, 8-9: White
- Off state (velocity=0): dim at ~8% brightness instead of black
- On state: full brightness of assigned color
- clear_all() sets dim colors instead of off
Latency sources fixed:
- debounce 50ms -> 5ms (switch_stub.cpp:15)
- Removed [MIDI OUT] Serial.printf from send_cc() (midi_transport.cpp:93-98)
- Removed [APP] Switch pressed/released prints from update() (app_task.cpp:39,43)
- Removed [APP] Switch -> CC print from process_switch_event() (app_task.cpp:140-143)
- loop() delay 10ms -> 1ms (main.cpp:390)
Serial output at 115200 baud was taking 2-5ms per printf call
in the critical button-to-MIDI path, adding 7-15ms+ total latency
per button press. All removed from hot path.
- Print raw ADC + mapped MIDI value on every change
- Remove cal min/cal max serial commands (broken with multi-word)
- Keep cal_min=0, cal_max=4095 defaults
- User moves pedal full range and reports min/max raw values
- Remove fixed 0-4095 mapping, use cal_min/cal_max instead
- Auto-calibrate minimum at boot (assumes pedal at heel)
- 'cal min' sets current position as heel (0)
- 'cal max' sets current position as toe (127)
- Map cal_min->0, cal_max->127 with clamping
- Update 'exp' command to show raw ADC + cal values
- Removed flash_sysex/flash_all/flash_one (conflicted with heartbeat)
- Simplified flash_activity: LED 0 white 50ms, restores properly
- Heartbeat only on LED 9 when no activity
- USB renamed: Manufacturer=JOC, Product=JOC Midi
- LED 1 green = CC received
- LED 2 color shows CC value range:
- Red (0-31) = recording?
- Amber (32-63) = queued?
- Green (64-95) = playing?
- Blue (96-127) = other?
- Helps map Loopy Pro Generic mode values to Launchpad palette
- Interface 1 (DAW): Button presses -> Loopy Pro
- Interface 2 (MIDI): SysEx + LED control <- Loopy Pro
- Both interfaces polled in update()
- Sends on DAW interface (like real Launchpad X)
- variants/esp32s3/pins_arduino.h overrides USB_VID/USB_PID
- Included via -I in build_flags before core variant
- This should force USB descriptors at hardware level
- flash_activity: only LED 0, restores properly
- flash_sysex: saves ALL LED states, restores all properly
- heartbeat: only LED 9, only when no activity flash active
- Added sysex_saved arrays to track all LED states
- Set USB VID/PID via ESP32 core build flags (may work better than TinyUSB API)
- Heartbeat on LED 9 (amber pulse every 2s) confirms device is alive
- SysEx flashes ALL LEDs white for 200ms
- Regular MIDI flashes LED 0 white for 50ms
Change USB device descriptor to VID 0x1235 PID 0x0103
so Loopy Pro recognizes the device as a Launchpad X
and sends LED control MIDI in Launchpad mode.
- Fixed note matching bug: removed channel check so notes 36-45 match
across channels 1-3 (Launchpad static/flashing/pulsing)
- Simplified LED lookup to match by note only (channel stored for mode)
- Replaced sparse palette with proper RGB gradients between key
breakpoints (Red, Orange, Yellow, Green, Cyan, Blue, Purple, Off)
ash
Ashley Strahle